NEOTEX-AF Acrylic Protective Coating with Anti-Fungal Properties
Pure Acrylic Protective Coating with Anti-Fungal Properties
NEOTEX – AF is a single component, high performance acrylic
co-polymer based coating, designed to offer excellent long term
waterproofing characteristics and resistance to UV degradation,
whilst remaining flexible to give excellent crack bridging ability.
PROPERTIES
- Single component, easy to apply by brush, roller and spray.
- Excellent UV resistance.
- Withstands substrate movements.
- Provide seamless coating.
- Elastomeric, high crack bridging capability.
- Environmental friendly, can be applied in confined areas.
- Can be applied to a wide range of substrates.
- Excellent adhesion to most of the substrates.
- Can be applied over existing systems.
- Excellent build properties. Enable application to horizontal and vertical surfaces.
AREAS OF APPLICATION
NEOTEX-AF is easy to apply, cost effective and particularly used in:
- Waterproofing of flashing, roof edgings, walls (either concrete, cement mortar, wood and metal), etc.
- Waterproofing of gardens, swimming pools, basement, and sandwich application.
- Wet areas, like bathrooms, kitchens, etc.
- Protective coating on polyurethane foam insulation.
METHOD OF APPLICATION
NEOTEX-AF acrylic coating shall be applied as per the following general
method of application:
A. Substrate preparation:
The performance and ultimately the durability of the coating largely depends
on the condition of the substrate. Therefore, conditioning and preparation of
the substrate is of utmost importance.
Concrete surface:
The surfaces shall be thoroughly cleaned to remove all dust particles and
laitance. Surface defects like potholes and pinholes on building facades on
the concrete shall be repaired with an appropriate polymer modified repair mortar.
Metal surface:
The surface should be cleaned from all rust scales. This can be achieved by wire brushing or grit blasting.
B. Priming
On new concrete surface the NEOTEX-AF coating can be applied directly.
However, it is highly recommended to apply a priming coat on all old and
porous substrates for improving the adhesion of the subsequent coats.
The priming coat can be prepared in the work site by diluting NEOTEX-AF with
only 10% clean potable water. The priming material shall be mixed thoroughly
using a low RPM paddle mixer to ensure proper homogeneity of the mix.
C. Top coat
Application of NEOTEX - AF is to be done by using a suitable roller or brush.
Large areas of application can be done by using an airless spray machine.
To achieve an appropriate consistency while using an airless spray we
recommend diluting the NEOTEX - AF by a maximum of 10% of potable water.
The coating always has to be applied with a minimum of 2 coats for optimum performance. The coverage rate will always vary depending on the area of
application and the nature of the substrate.
ANTI FUNGAL PROPRETIES
NEOTEX AF is effective in preventing the growth of a wide spectrum of algae,
yeast and mold fungi that can cause the defacement and degradation of surface
coating.
PACKAGING
NEOTEX - AF is available in 20 Kg Pail.
COVERAGE RATE
1 m² / Kg /Coat
STORAGE & SHELF LIFE
NEOTEX - AF pails should always be stored in dry and covered areas. The product should not be exposed to direct sunlight or be kept near any source of heat.
The product Shelf life is up to 12 months when stored as per the recommended storage conditions.
NEOTEX – AF is a single component, high performance acrylic
co-polymer based coating, designed to offer excellent long term
waterproofing characteristics and resistance to UV degradation,
whilst remaining flexible to give excellent crack bridging ability.
PROPERTIES
- Single component, easy to apply by brush, roller and spray.
- Excellent UV resistance.
- Withstands substrate movements.
- Provide seamless coating.
- Elastomeric, high crack bridging capability.
- Environmental friendly, can be applied in confined areas.
- Can be applied to a wide range of substrates.
- Excellent adhesion to most of the substrates.
- Can be applied over existing systems.
- Excellent build properties. Enable application to horizontal and vertical surfaces.
AREAS OF APPLICATION
NEOTEX-AF is easy to apply, cost effective and particularly used in:
- Waterproofing of flashing, roof edgings, walls (either concrete, cement mortar, wood and metal), etc.
- Waterproofing of gardens, swimming pools, basement, and sandwich application.
- Wet areas, like bathrooms, kitchens, etc.
- Protective coating on polyurethane foam insulation.
METHOD OF APPLICATION
NEOTEX-AF acrylic coating shall be applied as per the following general
method of application:
A. Substrate preparation:
The performance and ultimately the durability of the coating largely depends
on the condition of the substrate. Therefore, conditioning and preparation of
the substrate is of utmost importance.
Concrete surface:
The surfaces shall be thoroughly cleaned to remove all dust particles and
laitance. Surface defects like potholes and pinholes on building facades on
the concrete shall be repaired with an appropriate polymer modified repair mortar.
Metal surface:
The surface should be cleaned from all rust scales. This can be achieved by wire brushing or grit blasting.
B. Priming
On new concrete surface the NEOTEX-AF coating can be applied directly.
However, it is highly recommended to apply a priming coat on all old and
porous substrates for improving the adhesion of the subsequent coats.
The priming coat can be prepared in the work site by diluting NEOTEX-AF with
only 10% clean potable water. The priming material shall be mixed thoroughly
using a low RPM paddle mixer to ensure proper homogeneity of the mix.
C. Top coat
Application of NEOTEX - AF is to be done by using a suitable roller or brush.
Large areas of application can be done by using an airless spray machine.
To achieve an appropriate consistency while using an airless spray we
recommend diluting the NEOTEX - AF by a maximum of 10% of potable water.
The coating always has to be applied with a minimum of 2 coats for optimum performance. The coverage rate will always vary depending on the area of
application and the nature of the substrate.
ANTI FUNGAL PROPRETIES
NEOTEX AF is effective in preventing the growth of a wide spectrum of algae,
yeast and mold fungi that can cause the defacement and degradation of surface
coating.
PACKAGING
NEOTEX - AF is available in 20 Kg Pail.
COVERAGE RATE
1 m² / Kg /Coat
STORAGE & SHELF LIFE
NEOTEX - AF pails should always be stored in dry and covered areas. The product should not be exposed to direct sunlight or be kept near any source of heat.
The product Shelf life is up to 12 months when stored as per the recommended storage conditions.
طرق العرض
- 2265 عدد المشاهدات
- 1746 موقع المشاهدات
- 519 المشاهدات المدمجة
الإجراءات
- مشاركات اجتماعية
- 0
- 0
- 0تعليقات
عدد المشاركات
- 0 فيسبوك
- 0 توتير
- 0 ينكدين
يتضمن 3
- 38 www.sab-us.com
- 17 161.97.92.48
- 2 161.97.92.48:8011
-
LAVATEX 2000
11589 الآراء -
الوقاية من الحرارة والرطوبة العزل المائي
6723 الآراء -
DCL مطابقة منتج مختبرات بلدية دبي
6670 الآراء -
Optimization Methodology To Implement Thermal
6225 الآراء -
Wurth sealants & Adhesives
5889 الآراء -
TDS-PC-221-EN_2319 (Plug Cement)
5670 الآراء -
طبقات نظام العزل كومبو رووف
5603 الآراء -
AWAZEL PU 250 White
5599 الآراء -
Fosroc Conbextra EPGP
4981 الآراء -
Dr. Fixit PVA BOND.
4750 الآراء