SAB® Modiflex CW 216

70.00 د.إ 70.0 AED

70.00 د.إ

Add to Cart

Two Component Polymer Modified Flexible Cementitious Waterproof Coating

SAB® modiflex CW 216:
Is a two-component polymer modified cementitious coating.
The product may be trowel or brush applied to provide a flexible waterproof barrier.

  • Terms & Conditions 
  • Prices excluding  VAT.
  • Prices excluding delivery costs
  • Delivery: 2 working days, (Weekend Friday, Saturday and Sunday)

SAB® modiflex CW 216

Two Component Polymer Modified Flexible Cementitious Waterproof Coating


Is a two-component polymer modified cementitious coating. 

The product may be trowel or brush applied to provide a 

flexible waterproof barrier.


SAB® modiflex CW 216 may be used where there is a requirement

to exclude water from a building or retain it within a structure. 

The material is particularly effective for Pile head waterproofing.

 Water proofing of potable water reservoirs, both interior and exterior.

 To provide protection for concrete against carbonation and chloride attack.
 Waterproof coating for roofs, concrete water tanks, lift well, inspection pits, 

swimming pools spillways, bathrooms, kitchens and other wet areas.

 Waterproof lining for water retaining structures

 General construction waterproofing. As a protective coating for foundations.
 As a backing to marble and granite to prevent water ingress and thus alleviate 

surface staining protection against brackish water

 Coating sea water channels

 Protection of concrete against carbonation and chloride ion attack


 Excellent performance and flexible in nature, Good adhesion to most surface

 Non-toxic therefore suitable for potable water.
 Resistant to carbon dioxide and chloride ion diffusion. 
• Forms a film that provides an anti-carbonation coating over concrete.
 Can resist up to 7 Bars of pressure.
 Unlike conventional coatings which require 7 to 28 days cure of concrete, 

SAB®modiflex CW 216 can be applied to 24 hours old concrete,

thereby giving immediate protection to the concrete.

 Allows the substrate to breath.

Technical Data: 


Grey (Colors on request)

Drying time

3 hours

Specific Gravity


Tensile Strength (N/sqmm)

1.2 (+/- 0.2)

Elongation (%)

55 (+/- 10)



Hydrostatic pressure @5bar (50m)


(The properties shown above were obtained under laboratory conditions).

All values given are subject to 10% tolerance


CHEMICAL RESISTANCE: SAB® modiflex CW 216 is resistant to chemical solvents & oils.

Packaging and Storage:

Store out of direct sunlight, clear of the ground on pallets, protect from rainfall. 

Avoid excessive compaction. Shelf life is 12 months when stored as above. 

Failure to comply with the recommended storage conditions may result in 

premature deterioration of the product or packaging



Available in 20 kg kits.

Part A: 15 kg powder

Part B: 5 kg liquid.


1.7 to 1.8 kg / m² / 1 mm thickness


Website Visitors - 403182