AWAZEL MS Protection Board 3,4,6 mm

Public Channel / Data Sheets

3, 4, 6 mm thick, Bituminous Protection Boards

Description
MEMBRANE SHIELD (MS) are durable, lightweight,
semi - rigid and strong, bituminous
protection boards, for shielding
waterproofing membrane from site damage
or puncture by back-filling material. MS are
manufactured from selected fine aggregates
bound in oxidized asphalt, and then encased
between two layers of asphalt saturated
glass fiber/composite mat, to form a semi -
rigid, dense and strong board with high
compressive strength capable of bearing
typical foundation pressures. The high
compressive strength of MS is capable of
supporting the foundation reinforcements.

Features
• Mostly suitable for vertical applications
• Resists penetration of back-filling
materials and accidental damage from site
operations
• Pre-formed, easy to handle, quick to use
and economical
• Avoids the need for screed or masonry
protection
• Avoids delay; can be applied immediately
after waterproofing membrane laid and
inspected.
• Improves the overall ability of the
waterproofing system.
• High impact and puncture resistance

Function
MS are typically used as a protection board for all
types of vertical waterproofing applications. It
provides permanent protection to most water
proofing and dampproofing systems. Its high
puncture resistance protects the waterproofing
membrane from any impact by sharp aggregates
during the back-fill process and other later
settlements. Its own waterproofing characteristics
will improve the overall waterproofing ability of the system.

Packing
MS are produced in sheets of 1 x 2 meters.
Other lengths are available upon request.

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select Link to start with 

1. AWAZEL MEMBRANE SHIELD 3, 4, 6 mm thick, Bituminous Protection Boards Description MEMBRANE SHIELD (MS) are durable, light- weight, semi - rigid and strong, bituminous protection boards, for shielding waterproofing membrane from site damage or puncture by back-filling material. MS are manufactured from selected fine aggregates bound in oxidized asphalt, and then encased between two layers of asphalt saturated glass fiber/composite mat, to form a semi - rigid, dense and strong board with high compressive strength capable of bearing typical foundation pressures. The high compressive strength of MS is capable of supporting the foundation reinforcements . Features • Mostly suitable for vertical applications • Resists penetration of back-filling materials and accidental damage from site operations • Pre-formed, easy to handle, quick to use and economical • Avoids the need for screed or masonry protection • Avoids delay; can be applied immediately after waterproofing membrane laid and inspected. • Improves the overall ability of the waterproofing system. • High impact and puncture resistance Function MS are typically used as a protection board for all types of vertical waterproofing applications. It provides permanent protection to most water proofing and dampproofing systems. Its high puncture resistance protects the waterproofing membrane from any impact by sharp aggregates during the back-fill process and other later settlements. Its own waterproofing characteristics will improve the overall waterproofing ability of t he system. Instructions for Application Displacement of the MS can be prevented by bonding with AWAZEL Adhesive Compound, AMG. On vertical applications such as retaining walls, MS should be spot bonded on to the membrane with AMG, prior to back-filling or concrete operations. As general practice, MS can be installed by torch bonding method also ( a very slight torching can be done on the membrane at particular areas and the Prptection Board shall be attached to the membrane ) MS can also be fixed by mechanical fastening methods. Health & Safety MS has no health hazard due to its use and applications. Packing MS are produced in sheets of 1 x 2 meters. Other lengths are available upon request. Storage & Material Handling Should be kept flat in original packing in a shaded area. Normally the pallets should not be stacked one over another.

2. Dubai Office :Tel : +9714 – 3390600, Fax : +9714- 3395095, P.O. Box : 37724, Dubai - U.A.E., E-mail : awazel@eim.a e Abu Dhabi Office : Tel : +9712 – 5548220. Fax : +9712 – 5548221, P. O. Box : 108483, Abu Dhabi U.A.E. Factory : Tel : +9661 – 4981604, Fax : +9661 -4981707, P.O. B ox : 2955, Riyadh 11461, K.S.A. E-mail : info@awazel.com Website : www.awazel.com AWAZEL MEMBRANE SHIELD 3, 4 & 6 mm thick, Bituminous Protection Boards TECHNICAL DATA Properties Typical Results Test Method MS 30 MS 40 MS 60 Board Thickness, mm 3.0 4.0 6.0 UEAtc M.O.A.T. 30 Unit Weight of Board, kg/m 2 3.5 4.6 6.7 UEAtc M.O.A.T. 30 Board Size, m (Standard) 2 x 1 UEAtc M.O.A.T. 30 Density, g/cc 1.1 - 1.4 UEAtc M.O.A.T. 30 Softening Point OF Coating Asphalt, ºC > 100 ASTM D 36 Puncture Resistance, N 250 300 350 ASTM E 154 Deflection, mm 10.5 11.0 12.0 – 13.0 ASTM E 154 Static Puncture Resistance L 2 (Not punched at 7 kg load) L 3 (Not punched at 15 kg load) L 3 (Not punched at 15 kg load) UEAtc M.O.A.T. 27 Dynamic Puncture Resistance I 1 (Not perforated at 25-30 mm indenter) I 2 (Not perforated at 15-20 mm indenter) I 2 (Not perforated at 15-20 mm indenter) UEAtc M.O.A.T. 27

Views

  • 3793 Total Views
  • 2708 Website Views
  • 1085 Embeded Views

Actions

  • 0 Social Shares
  • 2
  • 0
  • 0 Comments

Share count

  • 0  Facebook
  • 0  Twitter
  • 0  LinkedIn

Embeds 3

  • 140 www.sab-us.com
  • 19 161.97.92.48
  • 4 161.97.92.48:8011

Website Visitors - 512782