RAKAM 401-RAK Acrylic Sealant

Public Channel / Data Sheets

(ACRYLIC SEALANT)

RAK ACRYSEAL is a permanent, flexible sealant for a wide variety of internal applications
where low (+/-5%) movement is anticipated. Excellent adhesion to most substra tes.

Propeties

RAK ACRYSEAL, Acrylic Flexible Filler is a
non staining, sealant that resists cracking
and gives a smooth finish that requires no
sanding

Uses

Ideal for caulking and sealing:
Door and window frames •Skirting Boards
• Floorboards •Walls
•Ceilings •Plasterboards
ADHERES TO:-
• Brick • Concrete • Plastic • Ceramics
• Tiles

Application

• Reseal container for storage and re-use.
Store away from extreme heat and cold.
• Joint sizes more than 20 mm wide or 10
mm deep must be filled with backing rod
as a back-up filler.
• Do not use for belo w waterline
applications.
• Do not use as a putty. Do not apply when
temperature is below 7°C

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instructions). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure product is stored as instructed on the safety section of the labelling. HEALTH AND SAFETY RAK ACRYSEAL is a permanent, flexible sealant for a wide variety of internal applications where low (+/-5%) movement is anticipated. Excellent adhesion to most substrates. (ACRYLIC SEALANT) 401 - RAK ACRYSEAL Ideal for caulking and sealing: Door and window frames •Skirting Boards • Floorboards •Walls •Ceilings •Plasterboards ADHERES TO:- • Brick • Concrete • Plastic • Ceramics • Tiles USES • Reseal container for storage and re-use. Store away from extreme heat and cold. • Joint sizes more than 20 mm wide or 10 mm deep must be filled with backing rod as a back-up filler. • Do not use for below waterline applications. • Do not use as a putty. Do not apply when temperature is below 7 ° C APPLICATION Ensure gaps and cracks to be filled are dry and free of grease, dirt, dust and any loose material. Fill the seam with sample amount of filler. Can be over-painted approximately two hours after application. SURFACE PREPARATION Clean tools with soap and water after use. CLEANING Up to 8 months in unopened packs stored under 30°C. kept out of direct sunlight SHELF LIFE Avoid contact with eyes and skin. Only use in well-ventilated areas. Keep out of reach of children. CAUTION RAK ACRYSEAL, Acrylic Flexible Filler is a non staining, sealant that resists cracking and gives a smooth finish that requires no sanding PROPERTIES TYPICAL PROPERTIES Application temperature Working time Complete drying time (Depending upon the substrate) Percentage solids Specific gravity Movement joint +7°C to 40"C 10 to 20 minutes 36 hours 78 +2% 1.56 10°A Wt: 5Kg Wt: 20Kg ORDERING GUIDE 401 ASTM C733 5 / 20 kg Packs White / Grey PRODUCT NO. STANDARDS PACKAGING COLOR F L O O RIN G & TI L IN G W A T E R P R O O FIN G B ON D IN G A G E N T S S E ALA N T S & MO R T A R S S P E CIA L I T Y P R O DU C T S 26 TECHNICAL DATA SHEET

Views

  • 71 Total Views
  • 50 Website Views
  • 21 Embeded Views

Actions

  • 0 Social Shares
  • 2
  • 0
  • 0 Comments

Share count

  • 0  Facebook
  • 0  Twitter
  • 0  LinkedIn

Website Visitors - 37942