RAKAM 507 RAK Gypsum Joint Compound

Public Channel / Data Sheets

(Joint Compound)

RAK GYPSUM COMPOUND is a ready to use high solids smooth paste
use as a fine coat, joint filling compound for gypsum boards and specially
manufactured for painters to repair/ touch up old/ new interiors that in turn
provides high quality. even surface prior for painting.3

Uses

• Skim coat & joint filling compound for gypsum boards.
• Plaster over sand / cement rendering gypsum plaster & plaster board.
• Joining of interior wallboards into the compound.
• Filling of small cavities prior to painting.

Application

Mix well and apply the paste with trowel or filling knife. Apply the filler in a thin even
layer and allow drying. Apply second coat, if necessary to achieve full leveling. Do not
add water or any thinning materials. Light sand paper over the dry final surface before
painting preferably within 24 hours of application. Thickness of each single layer should
not exceed 800 microns in application, otherwise will result in cracking upon drying.

Ordering Guide

Product No. -- 507
Standards -- RAKAM
Packaging -- 28kg/pail
Color -- White

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

1. As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instructions). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure product is stored as instructed on the safety section of the labelling. HEALTH AND SAFETY RAK GYPSUM COMPOUND is a ready to use high solids smooth paste use as a fine coat, joint filling compound for gypsum boards and specially manufactured for painters to repair/ touch up old/ new interiors that in turn provides high quality. even surface prior for painting. (Joint Compound) 507 - RAK GYPSUM COMPOUND • Skim coat & joint filling compound for gypsum boards. • Plaster over sand / cement rendering gypsum plaster & plaster board. • Joining of interior wallboards into the compound. • Filling of small cavities prior to painting USES Mix well and apply the paste with trowel or filling knife. Apply the filler in a thin even layer and allow drying. Apply second coat, if necessary to achieve full levelling. Do not add water or any thinning materials. Light sand paper over the dry final surface before painting preferably within 24 hours of application. Thickness of each single layer should not exceed 800 microns in application, otherwise will result in cracking upon drying. APPLICATION All mineral substrates must be free of eorescence, laitance, grease, form release oils and similar contaminants. Chalked or poorly bound substrates must be penetrated with suitable sealer or RAK Bond¬PVA. The surface must be clean and dry. SURFACE PREPARATION Do not use to fill large cracks, holes or damaged surface On dry & large surface area, sprinkle or wet the surface before the application. • The surface must be sound. • Newly constructed surface should be allowed to cure for atleast 21 days. CAUTION TYPICAL PROPERTIES Color Appearance Drying Time Density Avg Consumption Shelf Life White Flat Paste 1 hour initial depending on temperature and humidity 24 hours complete dry 1.8 1.5 kg/m2 @ 0.8mm thickness depending upon surface condition 12 months in original unopened packing Wt: 5Kg Wt: 28Kg ORDERING GUIDE 507 RAKAM 5 / 28 kg Packs White PRODUCT NO. STANDARDS PACKAGING COLOR F L O O RIN G & TI L IN G W A T E R P R O O FIN G B ON D IN G A G E N T S S E ALA N T S & MO R T A R S S P E CIA L I T Y P R O DU C T S 36 TECHNICAL DATA SHEET

Views

  • 73 Total Views
  • 45 Website Views
  • 28 Embeded Views

Actions

  • 0 Social Shares
  • 3
  • 0
  • 0 Comments

Share count

  • 0  Facebook
  • 0  Twitter
  • 0  LinkedIn

Embeds 2

  • 4 www.sab-us.com
  • 4 161.97.92.48

Website Visitors - 37950