SAB® Backing Rod
Polyethylene Back Up Material
SAB® Backing Rod: An extruded closed cell polyethylene backing rod designed for filling static and dynamic joints with varying degrees of expansion. White color
ADVANTAGES
Extremely pliable and compressible.
No bond to most sealants and easy to apply.
Easy to install.
Different rod diameters.
Good water & temperature resistance.
Suitable for use with cold-applied sealants
Such as:
Silicone, Polyurethane, Polysulphide,
Acrylic, Bitumen, etc.
Unlimited shelf life.
USES:
SAB® Backing Rod acts as a backup material for joint sealants, providing the sealant with the proper thickness. It also as a bond breaker, preventing mastic sealant from bonding to it (avoiding three-sided adhesion), allowing for the most efficient joint movement and design.
APPLICATION
SAB® Backing Rod should be fixed with a blunt tool. Precautions should be taken to avoid cutting or puncturing the surface skin. Avoid excessive longitudinal stretching of the rod when installing. The rod diameter should be approximately 25% larger than the joint width.
SAB® Backing Rod: An extruded closed cell polyethylene backing rod designed for filling static and dynamic joints with varying degrees of expansion. White color
ADVANTAGES
Extremely pliable and compressible.
No bond to most sealants and easy to apply.
Easy to install.
Different rod diameters.
Good water & temperature resistance.
Suitable for use with cold-applied sealants
Such as:
Silicone, Polyurethane, Polysulphide,
Acrylic, Bitumen, etc.
Unlimited shelf life.
USES:
SAB® Backing Rod acts as a backup material for joint sealants, providing the sealant with the proper thickness. It also as a bond breaker, preventing mastic sealant from bonding to it (avoiding three-sided adhesion), allowing for the most efficient joint movement and design.
APPLICATION
SAB® Backing Rod should be fixed with a blunt tool. Precautions should be taken to avoid cutting or puncturing the surface skin. Avoid excessive longitudinal stretching of the rod when installing. The rod diameter should be approximately 25% larger than the joint width.
Views
- 1057 Total Views
- 873 Website Views
- 184 Embeded Views
Actions
- Social Shares
- 2
- 0
- 0 Comments
Share count
- 0 Facebook
- 0 Twitter
- 0 LinkedIn
Embeds 2
- 1 161.97.92.48
- 25 www.sab-us.com
-
LAVATEX 2000
6331 Views . -
طبقات نظام العزل كومبو رووف
3493 Views . -
Optimization Methodology To Implement Thermal
3440 Views . -
DCL Product Conformity
3331 Views . -
-
-
-
VELOSIT® TDS-PC-221-EN_2319 (Plug Cement)
2771 Views . -
-
Approved Materials (TDS) for Sabtron Combo System
2762 Views . -
-
Fosroc Conbextra EPGP
2689 Views . -
-
SAB Trade Mark Certificate
2597 Views . -
Wurth sealants & Adhesives
2592 Views . -
-
-
مصطلحات هندسية Geometric terms
2520 Views . -
SAB ® بولي ريثان
2520 Views . -
شمس البوادي - علامة تجارية مسجلة
2509 Views .